4.
Next slide on the Counter Weight and lock it in place. In order to clear the electronic cables the Counter
Weight should be as close to the end of the shaft as possible without covering up the Safety Clip hole.
5.
Insert the Safety Clip into the hole at the end of the shaft. Once you have correctly positioned the
Counter Weight this position will not change and no further adjustment should be necessary.
Counter Weight
NOTE:
The Cradle has been balanced at the factory so it should not be necessary for you to
perform this adjustment. The Cradle is balanced if you can rotate the cradle to any
position and it will stay in that position.
NOTE:
With some cameras it may be possible to balance the camera without using the counter
weight.
6.
Balance the Cradle by sliding the Counter Weight on the shaft and locking it in place with the Locking
Screw. The weight is used to counter balance the
Cradle only
; you must
remove the Trolley
before
performing this process.
Locking Screw
Safty Screw
Move weight until
cradle is balanced.
Warning:
The Dutch head should never be operated without the counter balance
SAFETY SCREW
in
place.
