ELECTRICAL CABLES
HEAD CABLE
G
A
IN
L
IM
IT
R
A
M
P
DC POWER SUPPLY
EXTENSION
DUTCH SERVO
Dutch connector on Head
The Cables that come with the Dutch Head Kit allow the Kit to be used on all Jib sizes out to the Extreme.
The Dutch Head cannot be used on the Jimmy Jib II (solid bar stock head).
NOTE
: If you find it necessary to run the Dutch on battery power it will be necessary to power it from a
separate battery pack. It was found that when trying to power the Dutch and the Stanton Head from
the same battery pack caused power to drop so quickly that it was impractical to power them both
from a single battery.
HEAD CABLE
On newer systems the Dutch Head Cable has been installed at the factory and is labled as such.
Routing the Head Cable through the Pan Shaft (on older systems) is the neatest method of attaching the
cable. The cable will then not require a large slack Loop and will always remain on the Head. It will,
however, require you to either cut the cable or remove a connector so that the cable can be routed through
the pan shaft.
