CABLE ROUTING
Routing the Cables to the Camera on the Dutch Head can now be done. This process, when done for the
first time, will probably take several hours so make sure you allow yourself plenty of time to do the Job right.
1.
Make sure you check cable clearance in Dutch Right and Dutch Left positions.
2.
Make sure you Tilt the Head when in the Dutch Right and Dutch Left positions.
3.
After 30 minutes or so the cables will tend to sag and may cause the cables to bind as the Head is Dutched.
4.
It is very important to make sure that there is no binding or snagging of the cables as the head is dutched.
Any tendency of the cables to “grab” will the head to jerk.
