background image

TPY

R

38

11

 

  

Annexes

11.1

  declaration of the conformity

Hereby declares as manufacturer entirely on his own responsibility,that 

the products:

DL(JGGC)

Vertical multistage centrifugal pumps series:DL(JGGC)

(

)

       In case the pump is delivered without motor:

GB/T10832-2008

to which this declaration refers,is in accordance with the following 

standard:GB/T10832-2008

      In case the pump is delivered with an electromotor:

GB/T10832-2008

JB/T5273-2002

to which this declaration refers,is in accordance with the following

standard:GB/T10832-2008 and JB/T5273-2002

     In case the pump is delivered with an ATEX classified motor:

GB/T10832-2008

GB3836

to which this declaration refers,is in accordance with the following

standard:GB/T10832-2008 and Gb3836

The pump is subject to this declaration of conformity as a stand alone

product.

TPY

R

37

                             David 

Liu

2011-8-18                                           18-8-2011

                                                            Authorized representative

                             Cai 

Jin 

San

2011-8-18                                           18-8-2011

                                                             technical director

Make sure the appliance or installation in which the pump is built in,has

got a declaration of compliance with the directives listed above,for its

complete assembly.

Содержание DL(JGGC) 12






















Отзывы: