Jianshe JS125-6B, Руководство по обслуживанию

Страница: 53 / 210

PERIODIC INSPECTION AND ADJUSTMENT
43
Don't mix different brand brake fluids. The brake fluid
can erode painting surface or plastic parts. Therefore
the leaked fluid must be wiped off immediately.
Note
Warning
Exhaust
When the parts related to the brake fluid are
disassembled, must make sure that the other parts is
locked and sealed, and then conduct the exhaust
operation.
Exhaust orders
1. Disassemble the brake fluid cylinder cover.
2. Disassemble the brake fluid cylinder diaphragm.
3. Install a rubber hose at the front end of the oil
drain screw , and put an oil tray in front of the
front end of the rubber hose.
4. After braking several times, the brake handle is held
tightened, loosening the oil drain screw about one-half
cycle, and then tightened it rapidly.
Note
Note
Warning
5. Repeat above procedures, until the oil drain screw let
off bubbles completely.
Supplement brake fluid in the meantime, mustn't make
it below the lower limit position.
Hold the brake handle, check whether brake fluid leaks
or not, wiping off the brake fluid splashed on the brake
disc, the tyres and the wheel rim.
6.Reinstall the brake fluid cylinder diaphragm.
7.Reinstall the brake fluid cylinder cover.
Mustn't the brake handle before re-newly tighten the oil
drain screw.
******************************************
******************************************