P.
12
sTeP
3
sTeP
1
Pry off the logo
cap covering the
mounting screw.
Loosen the mounting
screw with a Phillips
screwdriver.
adjust the boom so it’s
pointing at your mouth,
just a ¼ inch away and
slightly off-center. make
sure the screw on the boom
enclosure is facing outward.
sTeP
2
We attempt to set the angle of the
microphone boom at the factory, but it
can vary slightly from person to person.
Ideally, the microphone should point
directly at your
mouth
.
tests have shown
this to be a far more efficient configuration
than aiming the boom at your eyes, nose
or pituitary gland.
Adjusting the boom
