SX8 User Manual
G-‐UM-‐00004 Rev 006
7 of 45
Table 2: Other Specifications
Parameter
Specification
Dimensions W x H x D (3U/6U)
48 x 13.5 x 37.5/48 x 27 x 37.5 cm
Weight
15
kg
(depending
on
configuration)
Operating Temperature
0 to 55 °C
Storage Temperature
-‐40 to 70 °C
Humidity (Non-‐condensing)
Maximum 95% RH from 0 to 40 °C
Compliance
FDA-‐CDRH Compliance
Under the US Food and Drug Administration (FDA) Center for Devices
and Radiological Health (CDRH), the unit complies with the Code of
Federal Regulations (CFR), Title 21, Subchapter J, which pertains to laser
safety and labeling. See the link below for more information.
http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSe
arch.cfm?CFRPartFrom=1000&CFRPartTo=1050
CSA / IEC Compliance
The unit complies with certain standards of the Canadian Standards
Association (CSA) and the International Electrotechnical Commission
(IEC).
The unit is in Installation Category (Overvoltage Category) II under IEC
664. IEC 664 relates to impulse voltage levels and insulation
coordination. The particular category is defined as: local level,
appliances, portable equipment, etc, with smaller transient
overvoltages than Installation Category (Overvoltage Category) III.
The unit is in the Pollution Degree 2 category under IEC 1010-‐1 and
CAN/CSA-‐C22.2 No. 1010.1. The IEC standard on Safety Requirements
for Electrical Equipment for Measurement, Control, and Laboratory Use
relates to insulation coordination. The CSA standard is on Safety
Requirements for Electrical Equipment for Measurement Control, and
Laboratory Use, Part I: General Requirements. The Pollution Degree 2
category is defined as follows: “Normally only non-‐conductive pollution
occurs. Occasionally, however, a temporary conductivity caused by
condensation must be expected.”
