JG special products GmbH
Seite | 34
Wipe back and forth to remove aerosol and debris
3. Remove any media debris from the cutter with tweezers.
As needed maintenance tasks
The following general maintenance tasks should be performed on an as needed basis,
based upon inspection during every day use and/or when performing other tasks.
The printhead cartridge should be manually wiped after the following occurrences:
after paper jams
before re-installing a used printhead cartridge into the print engine
if print quality is showing signs of contamination
if automated maintenance algorithms prove ineffective for nozzle recovery
There are two methods for cleaning the print head cartridge; one which is installed and
one which is removed from the unit. Both methods are listed below. When removing and
reinstalling a used printhead or when replacing a printhead, use the second method.
Printhead cartridge cleaning (manual wipe while installed)
