JF-Stoll GX 2402 SC страница 55 Скачать руководство пользователя | Manualshive

Страница: 55 / 56

background image

WARRANTY

JF-Fabriken - J. Freudendahl A/S, 6400 Sønderborg, Denmark, hereafter called "JF",
grants warranty to any buyer of new JF machines from authorized JF-dealers.

The warranty covers remedy of material and production faults.
This warranty is valid within a year after date of sale to end-user.

- The warranty is invalidated in the following cases:

1.

The machine has been used for other purposes than those described in the instruction
manual.

2. Improper

use.

3.

Damage caused by external sources, e.g. lightning or falling objects.

4. Insufficient

maintenance.

5. Transport

damage

6.

The construction of the machine has been modified without JF's written permission.

7.

Unskilled repair of the machine

8.

Unoriginal spare parts have been used.

JF cannot be held responsible for loss of income or legal claim as a result of faults either of the owner
or of a third party. Nor is JF responsible for wages beyond current agreements in connection with
replacement of warranty parts.

JF is not responsible for the following costs:

1.

Normal maintenance such as expenses for oil, grease and minor adjustments.

2.

Transport of machine to and from workshop.

3.

The dealer's travelling expenses or freight charges to and from the user.

Warranty is not granted on wearing parts unless it can clearly be proved that JF has committed a fault.

The following is regarded as wearing parts:

Protective canvases, blades, blade suspensions, shearbars, guide shoes, stone protections,
discs, rotor skirts, conditioner parts, tyres, tubes, brakes shoes, chain tightener parts, guards,
hydraulic hoses, conveyors, wheel-fixing bolts and nuts, snap rings, sockets, PTO drive shafts,
clutches, gaskets, seals, tooth belts, V-belts, chains, sprocket wheels, carriers, conveyor chain
slats, rake and pick-up times, rubber seals, rubber paddles, shares, wearing plates and lining for
spreading platform, shredding blades incl. bolts and nuts, beaterbars and vanes for farmyard
manure spreaders.

In addition, the user must note the following:

1.

The warranty is only valid if the dealer has undertaken a predelivery check and has given
instruction to the end user in the use of the machine.

2.

The warranty cannot be transferred to others without JF's written permission.

3.

The warranty can be nullified if repair is not undertaken immediately.

«
...
53
54
55
56
»

Содержание GX 2402 SC

























































Отзывы:

Нет отзывов

Похожие инструкции для GX 2402 SC

Бренд: H&S Страницы: 96

ZT ELITE BZS48KT740

Бренд: Bad Boy Страницы: 36

Бренд: Toro Страницы: 52

Бренд: Poulan Pro Страницы: 56

Бренд: Toro Страницы: 116

Бренд: MASCOT Страницы: 8

Бренд: Ryobi Страницы: 272

Бренд: Jacobsen Страницы: 56

Бренд: Nakayama Страницы: 80

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 100

Бренд: Craftsman Страницы: 92

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 96

Бренд: Craftsman Страницы: 100

Бренд: Craftsman Страницы: 112

Бренд: Craftsman Страницы: 112

Бренд: Craftsman Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды