JF-Stoll GX 2402 SC страница 29 Скачать руководство пользователя | Manualshive

Страница: 29 / 56

background image

3. ADJUSTMENTS AND DRIVING

FINGER CONDITIONER (SM MODELS)

CONDITIONER SPEED
There are two conditioner speeds available:

Normal

=

860 rpm

Reduced

=

700 rpm

From the factory the machine is mounted to work at normal speed; 860 rpm.

Fig. 3-15 If you wish to reduce the rotor speed, replace the 27 teeth sprocket wheel on the

rotor shaft by the 33 teeth sprocket wheel from the supplied spare parts package.
This is done as follows:

1) Loosen the tension wheel Z and move it upwards so that the chain is loose.
2) Dismount the sprocket wheel A on the rotor shaft.
3) Mount the other (larger) sprocket wheel from the spare parts package on the

shaft.

4) Press the tension wheel Z down towards the chain and tighten the sprocket

wheel.

CONDITIONER PLATE ADJUSTMENT
The machine is equipped with a simple and easily operated system for central
adjustment of the degree of conditioning.

Fig. 3-16 This degree of conditioning is changed by regulating the distance between the

conditioner plate B and the conditioner fingers C on the rotor. (The shorter the
distance, the stronger the conditioning of the crop.)

Fig. 3-17 The system is operated with the handle D which can be placed in 3 positions on the

bracket E. The distance of the conditioner plate to the rotor is changed by moving the
handle D to one of the other holes in the bracket E. If the handle is placed in pos. (A),
the distance between the conditioner plate and the conditioner fingers is short, in
pos. (B), the distance is medium and in position (C) the distance is long.

The adjustment of the system depends on several conditions. The optimal
conditioning can be obtained with the following adjustment of the conditioner plate:

You have a:

Succulent, green

crop

or

Strawy, more ripe

crop

You want to drive:

above

8

km/h

below

8

km/h

above

8

km/h

below

8

km/h

The following adjustment of the
machine is recommended:

High

X X

Conditioner rotor
speed

Low X X

Long (C)

X

Medium

(B)

X X

Distance between
conditioner plate
and rotor

Short (A)

X

From the factory the machine is adjusted for a medium degree of conditioning in pos. (B).
This adjustment provides a satisfactory performance under normal conditions.

PIGB-093X-06 GX 2402/2802/3202 SM-GX 2402/2802 SC 0410

29

«
...
27
28
29
30
31
...
»

Содержание GX 2402 SC

























































Отзывы:

Нет отзывов

Похожие инструкции для GX 2402 SC

Бренд: Land Pride Страницы: 60

Бренд: MacDon Страницы: 2

EC Hydro Midsize

Бренд: Ransomes Страницы: 150

Бренд: Gardena Страницы: 9

Бренд: Qualcast Страницы: 20

Бренд: Poulan Pro Страницы: 30

Бренд: Skil Страницы: 104

Бренд: Viking Страницы: 36

Бренд: Parker Страницы: 26

Бренд: Cub Cadet Страницы: 68

Бренд: Garten Meister Страницы: 84

Бренд: Ferris Страницы: 60

Бренд: Garland Страницы: 120

Бренд: Simplicity Страницы: 56

Zero Turn Rotary Mower

Бренд: Jacobsen Страницы: 62

Greensplex 160 898850

Бренд: Ransomes Страницы: 36

Бренд: Dolmar Страницы: 76

Бренд: Craftsman Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды