JF-Stoll GX 2402 SC, Инструкция по эксплуатации

Страница: 6 / 56

1. INTRODUCTION
1. INTRODUCTION
INTENDED USE
JF disc mowers are developed for agricultural work. They should only be connected
to tractors and driven by the PTO of the tractor.
The disc mowers are solely intended for:
Cutting on the ground of natural or planted grass and stem crops for
animal feeding purposes
It is assumed that the work is performed under reasonable conditions, i.e.
that the fields are cultivated normally and to a reasonable extent kept clear
of stones and foreign matter.
Any use beyond this is outside the intended use. JF-Fabriken A/S is not responsible
for any damage resulting from such use, the user bears that risk.
If changes are made on the machine and its construction without permission from JF-
Fabriken A/S, JF-Fabriken A/S cannot be held responsible for any damage resulting
from this.
Intended use, of course, implies that you observe the prescriptions in the instruction
manual and the spare parts book, use original spare parts and contact an authorised
workshop, in so far as it is necessary.
The following safety instructions as well as common rules concerning technical
safety, working practices and road safety must be observed altogether.
The disc mowers should only be used, maintained and repaired by persons who,
through relevant instructions and after reading the instruction manual, are familiar
with the machine in question and, in particular, are informed of possible dangers.
PIGB-093X-06 GX 2402/2802/3202 SM-GX 2402/2802 SC 0410
6