33
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a
message similar to:
Load Standard Defaults (Y/N)? N
Press <Y> to load the BIOS default values for the most stable system operation and
minimal performance.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Load Optimized Defaults (Y/N)? N
Press <Y> to load the default values that are factory settings for optimal
system operation performance.
3-13 Set Supervisor/ User Password
You can set supervisor password, user password, or both. The differences are:
Supervisor password:
You can enter the setup menus and change the options.
User password: You can enter the setup menus but do not have the right to
change the options. When you select this function, the
following message will appear at the center of the screen to
assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password
typed will clear any previous password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection without entering password. To disable a password,
just press <Enter> when you are prompted to enter the password. A message will
confirm if you want to disable the password. Once the password is disabled, the
system will boot and you can enter Setup menus freely.
PASSWORD DISABLED.
When a password has been enabled, you have to enter it every time before you
enter the Setup. This prevents an unauthorized person from changing any part of
your system configuration.
