15
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector.
The On-board Parallel Port can be disabled through the BIOS SETUP.
Please refer to Chapter 3 "INTEGRATED PERIPHERALS SETUP" section for
more information.
(5)VGA Connector (15-pin female): J5
This connector is for on-board VGA display connection only. If you insert any
external VGA card in PCI slot, you should have the connection to your VGA card's
connector. And you have to set "Init Display First" to PCI under Integrated
Peripherals option in BIOS Setup Utility to get display from PCI VGA card.
(6)S-Video Connector (4-pin female): JACK1
This connector is for on-board TV-OUT connection . If you connect the system to
any external TV device, you will find NTSC/ PAL selection in BIOS Setup.
(7) Audio and Game Connector: J8,J9
Thess connectors are 2 phone Jacks for LINE-OUT, MIC-IN .
Line-out : Audio output to speaker
MIC-IN : Microphone Connector
(8) Serial Port COM1: J3
COM1 is the 9-pin D-Subminiature mail connector. The On-board serial port
can be disabled through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED
PERIPHERALS SETUP" section for more information.
(9)Floppy Drive Connector (34-pin block): FDD1
This connector supports the provided floppy drive ribbon cable. After connecting
the single plug end to motherboard, connect the two plugs at the other end to
the floppy drives.
