background image

 
 
                                                                                                                                                                                                                                                                                                                                               

 

 

 

33

 

System BIOS Cacheable 

Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in 
better system performance.    However, if any program writes to this memory area, a system 
error may result.    The settings are: Enabled and Disabled. 

Video RAM Cacheable 

Select Enabled allows caching of the video BIOS, resulting in better system performance.  
However, if any program writes to this memory area, a system error may result. The settings 
are: Enabled and Disabled. 

Memory Hole At 15M-16M 

You can reserve this area of system memory for ISA adapter ROM.  When this area is 
reserved, it cannot be cached.    The user information of peripherals that need to use this area 
of system memory usually discusses their memory requirements. The settings are: Enabled 
and Disabled. 

Delay Transaction 

The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles.   
Select Enabled to support compliance with PCI specification version 2.1.    The settings are: 
Enabled and Disabled. 

AGP Transfer Mode 

In this item you can select AGP transfer mode Auto/8X/4X the Default setting is Auto. 
 

3-7-1   DRAM Timing Settings 

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 

DRAM Timing Settings 

Item Help 

    Auto Configuration           Standard 
    SDRAM CAS Latency Time       2.5 
    SDRAM Cycle Time             7 
    SDRAM RAS# to CAS# Delay     3 
    SDRAM RAS# Precharge Time    3 
     
   
 
 
 

 
  Menu Level >> 

↑↓→←

 Move Enter:/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 

F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults 

 

SDRAM CAS Latency Time   

Содержание 875PMAXR2A







































































Отзывы: