37
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend
→
off,
All Modes
→
Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS
(default)
Initial display power management signaling.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
PM Wake Up Events
Please refer to section 3-8-1
3-8-1 PM Wake Up Events
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
PM Wake Up Events
Item Help
IRQ [3-7,9-15],NMI Enabled
IRQ 8 Break Suspend Disabled
RING Power Up Control Disabled
MACPME Power UP Control Disabled
PCIPME Power Up Control Disabled
KB Power ON Password Enter
Power Up by Alarm Disabled
x Month Alarm NA
x Day of Month Alarm NA
x Time (hh:mm:ss) Alarm 0 : 0 : 0
Menu Level >>
