12
CPU ZIF Socket-A
Colden Arrow
S
o
cket-
A
AMD
®
When you put the CPU into the ZIF socket. No forces require to insert of the CPU,
then press the level to Locate position slightly without any extra force.
2-3-3 Over clock Running
WARNING!
This section is for experienced motherboard installer only. Over
clocking can result in system instability or even shortening life of
the processor.
After setting the Jumper
S1
you can choose over clock running by BIOS CMOS
SETUP UTILITY. When you entered CMOS SETUP UTILITY, choose “Miscellaneous
Control” you will see the screen as below, when setting clock control by software,
you can setting Host Clock step by step in Host Clock at next boot from 100MHz to
166MHz for user approach over clock running.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Miscellaneous Control
Item Help
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
Clock Control By Software
** Current Host Clock is 100 MHz **
HOST clock at next boot is 100 Mhz
** Current DRAM Clock is 100 MHz **
DRAM clock at next boot is 100 Mhz (HOST CLK)
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Clock Control
This item allows you to set the CPU Host Clock by Hardware (Jumper
S1
), or by Software
(BIOS)
Host clock at next boot is
