Jetter JetMove 225-480, Руководство пользователя

Страница: 79 / 126

JetMove 225-480 9.1 Error Messages
Jetter AG 79
9 Diagnostics
9.1 Error Messages
Note!
In the case of an error message, the letter "F" and two successive numbers
appear on the 7-segment display every second.
Fault Message Table JetMove 225-480
Fault
Number Type of Error Description Error
Response Rectification
F 00 Hardware errors Internal hardware
defect – Immediate
controller
disable
– Separate the drive
controller from the
power lines
– Return the amplifier for
repair
F 01 Internal power
supply error One or more power
supply voltages are
beyond their limits. – Immediate
controller
disable
– Separate the drive
controller from the
power lines
– Return the amplifier for
repair
F 02 Mains phase
error Failure of one of
the mains phases. – Immediate
controller
disable
– Check fuses and wiring
– Acknowledge failure
F 03 Motor cable
breakage The motor cable is
broken.
Please note:
The motor cable is
tested at enabling
the controller for
the first time.
– Immediate
controller
disable
– Check the motor cable
connections
– Acknowledge failure
F 04 Overvoltage in
the DC link A DC link voltage
> 850 V has been
detected. – Immediate
controller
disable
– Check input power
supply
– If the motor is used as
generator, reduce the
regenerating power
– Acknowledge failure