JETStream PI-123, Инструкция по эксплуатации продукта

Страница: 38 / 40

38 PI-123 January 2022
WARRANTY
Limited Warranty. Each Waterblast Unit, Bareshaft Pump, and Fluid End
manufactured by Jetstream is warranted against defects in material
and workmanship for a period of 12 months or 1,000 hours, provided it
is used in a normal and reasonable manner and in accordance with all
operating instructions. If sold to an end user, the applicable warranty
period commences from the date of delivery to the end user. If used for
rental purposes, the applicable warranty period commences from the
date of delivery to the party holding the equipment available for rent.
This limited warranty may be enforced by any subsequent transferee
during the warranty period. This limited warranty is the sole and
exclusive warranty given by Jetstream.
Exclusive Remedy. Should any warranted product fail during the
warranty period, Jetstream will cause to be repaired or replaced,
as Jetstream may elect, any part or parts of such Waterblast Unit,
Bareshaft Pump, or Fluid End that the examination discloses in
Jetstream’s sole judgment to be defective in material or factory
workmanship. Repairs or replacements are to be made at Jetstream
in Houston, Jetstream FS Solutions Rental Center, the customer’s
location, or at other locations approved by Jetstream. Labor is furnished
only when the unit or part is returned to the factory or when travel
and expenses are paid by the purchaser. Freight, travel and expenses
incurred in connection with repair or warranty are excluded from this
warranty and shall be paid by the purchaser. The foregoing remedies
shall be the sole and exclusive remedies of any party making a valid
warranty claim.
The Jetstream Limited Warranty shall NOT apply to (and Jetstream shall
NOT be responsible for):
1. Major components or trade accessories that have a separate
warranty from their original manufacturer, such as, but not limited to:
diesel engines, electric motors, electronic soft starter and/or across the
line starter panels, axles, PTO’s, clutch packs, high pressure gauges,
high pressure hoses, flex lances, etc.
2. Normal adjustments and maintenance services.
3. Normal wear parts such as, but not limited to: oil, clutches, belts,
filters, packing, cartridges, univalves, face seals, diffusers, gland nut
bushings, plungers, nozzles, rupture disks, etc.
4. Failures resulting from the machine being operated in a