JETStream PI-123, Инструкция по эксплуатации продукта

Страница: 21 / 40

21 PI-123 January 2022
SECTION 6: SERVICE
Figure A
NOTE: See Appendix B for list of PNs and accessories.
6.0 TUBE SPINNING NOZZLE MAINTENANCE
When not in use, store nozzle in a dry place. If nozzle is to be stored
more than a few days, disassemble and apply WD-40® or other
penetrating oil to nozzle body and sleeve. Reassemble Tube Spinning
Nozzle per installation instructions.
See YouTube channel for videos on various Jetstream products.
https://www.youtube.com/user/JetstreamWaterblast
Remove the nozzle from service if:
A. The body, sleeve, or front nozzle shows signs of cracking or other
damage.
B. The wall thickness of these parts is reduced by 25% at any point.
C. The nozzle can no longer hold pressure at water flow rate for which
it was sized.