JetStor JX Series, Руководство пользователя

Страница: 13 / 53

Getting Started with CLI
1
1. Getting Started with CLI
Thank you for purchasing
AC&NC
products.
JetStor JX
series CLI (Command-Line
Interface) are intended for system administrators, developers, or engineers to manage the
system. It provides command sets to set system settings, show SAS ports and disk drives
status, set zone configurations, show system information, download and upgrade
firmware, monitor system log, and enclosure information including system temperature,
voltage, PSU (Power Supply Unit), and fan speed.
1.1. System Requirement and Setup
The
JX
series uses the console port as the command line interface. Please use the
console cable in the accessory box, and connect it between the controller and the
server/host. The CLI function can be accessed by using terminal emulator on a
management host that directly connected to the serial port of the
JetStor
series.
The following procedure will help you to setup the serial console via the console cable that
is enclosed in the shipping carton. The following image is the appearance of the console
cable.
Figure 1-1 Appearance of a Console Cable
Procedures to Setup the Serial Console
1. Setup the serial cable between the controller and one server/host like in the below
image.