45
► Check the ground for obstacles and bumps before changing position.
When using a stacking machine, improper transportation can cause damage to the machine.
The following points must be noted when using a trolley to change the position of the machine:
• For safety reasons, you must not push the trolley when changing its position, only drag it.
• Only drag the trolley, not the machine.
The manufacturer is not liable for damage caused by misuse of the trolley or failure to follow the
instructions.
5.15
Power Off
5.15.1
End of run
Standby mode
In standby mode, the machine is still powered on.
Do not remove the chassis.
Power off the machine before performing repair work.
► If it has not yet started, start the machine cleaning in the background management of the machine (cleaning
will start).
► Daily and weekly cleaning as needed.
► Empty and clean the water catch dish.
See the "Cleaning" section for specific data.
After the automatic cleaning is completed, close the door and small door of the machine and unplug
the power plug.
5.15.2
Long downtime (more than 1 week)
In case of extended downtime, such as corporate holidays, the coffee machine and other ancillary
equipment must be turned off.
► Perform "Fresh Milk Cleaning" in the "Cleaning" section;
► Power off the machine by unplugging the power or turning off the main switch installed at the device.
