Instructions manual: MULi6s Module
Battery cells are connected from "1" to "6", unless the connection is maintained and the sensor is
powered, the red LED lights up.
The sensor is powered either from the first two battery cells or from
the receiver via the EXT output, whichever is the higher the supply voltage.
If we only want to view the status of the battery, we do not have to connect the receiver or the Jetibox, the
green LEDs will first show which cells are connected and then the status of the weakest cell of the
module is on. The LEDs are graded according to the cell voltage according to the following table:
After a while the green LED goes out and the module goes into sleep mode with low power consumption.
It can be put into normal mode by connecting a receiver or a Jetibox (powered). After this "wake up", the
status of the connected inputs and the state of the weakest cell of the module are displayed, the LEDs will
go out after a while. Then, the LED always lights for 0.3s and displays the state of the weakest cell to
save the potential of the first two cells. To put the module back into "sleep" mode, just unplug the
receiver or Jetibox (or their power supply).
If we connect the module to the receiver without connected batteries, we can, for example, read the last
recorded minimum and maximum on the Jetibox independently of the "trigger level" sensor setting (no
additional modules attached). With this module connected, all the LEDs light up for a while and then go
out, so the module indicates that it is OK. The module has, in addition to input connectors, a balance
connector for cells, one output and one optically isolated input. The output - a twisted triple end
terminated by a black JR connector, connects the Jetibox or the receiver. On the input - a three-wire with
a pitch of 2.54mm, another module can be connected. This input will connect the output (twisted three-
wire with JR connector) from the next module. The modules can be chained in series.
4
0 – 3,3V
1 LED
3,3 – 3,5V
2 LED
3,5 – 3,7V
3 LED
3,7 – 3,9V
4 LED
3,9 – 4,1V
5 LED
4,1V and more
6 LED
