JETI model Duplex DS-16, Руководство пользователя

Страница: 121 / 164

computer radio control system
EN
4. 4.
By selecting the pushing the “Sensors & Variables” option using the
3D rotary button, you are able to choose which variables will be
expressed by a synthesized voice. The first column represents the
name of the sensor or variable. The Repeat option provides an easy
way to add a variable to the Repeat queue or to remove a variable
from the Repeat queue. By selecting the Trigger option, the specified
variable is added into the Trigger queue, so that every time the
Trigger switch is activated, the items in the Trigger queue are
expressed by synthesized voice.
You may change the priority of any variable. This will also change the
order of the reported items. Possible choices for priority are: Low,
Medium and High. The order, top to bottom, is from High priority to
Low priority.
9.4.5 Sensors/Logging Setup
This menu lists all of the Duplex EX sensors and their values which
are operating in your model. When you connect a sensor to a Duplex
EX receiver, it may take several minutes for the sensor to be
recognized by the transmitter and added to the list.
In this menu you can edit the telemetry parameters of each sensor.
It is possible to store service information of the transmitter, alarms,
and position of up to 4 controls (as markers) on your SD card. Then
the data is a part of logged flight telemetry. In the menu
„ Timers/sensors -> Sensors/Logging ” setup go to the item
Transmitter status info and push the 3D button. In the menu it is
possible to select whether the text information about the alarms and
other general data about the transmitter state will be stored (by
default it is disabled). Note that some PC programs for the evaluation
of telemetry data can recognize the text information as an error in
the data file. To view the information, you should use the built-in
Data analysis application or update the PC program.
In this menu you can also select up to four controls whose position
will be recorded in a file on the SD card. It is possible to select
120