JETI model Duplex DS-16, Руководство пользователя

Страница: 102 / 164

computer radio control system
EN
4. 4.
4. Throttle Cut Setting
This safety feature is mainly for models using glow or gasoline
engines as their main source of power. Electric models can also
highly benefit from this safety feature. The Throttle Cut function can
be activated using any assigned switch, knob or stick. By editing the
“Output Value” item, the throttle output will move to the user
defined (completely off) throttle position once the assigned switch
is activated.
5. Throttle Idle Setting
This feature is used to set the idle position for your throttle and will
prevent your engine from shutting-off when you move throttle stick
to its low position. The minimum throttle setting is defined by
editing the
“Idle Offset” value. When this function has been
activated, the minimum throttle setting (idle point) is defined by the
offset value as a percentage. Standard throttle function is not
affected by the idle offset setting.
9.3.2 Sticks / Switches Setup
This menu contains System Stick/Switch settings and configuration.
Various functions can be activated by any Switch, Stick or Knob
position. Switch setting enables you to set the points when your
desired function/timer/telemetry can be turned ON or OFF.
1
2
3
4
1. Switch & Stick Type
The first menu line item lists the control’s number and the second
item lists the type of control element. Using the
“F2” and “F3”
function buttons you can scroll through channels, with the “F5 (Ok)”
button you can exit the menu screen.
By default, the switch types are always automatically detected,
however, it is also possible to overwrite any of the auto-detected
switch types with a user-defined type. The choices are:
"Auto" which
keeps the auto-detection running, "None" that disables the
particular input control, standard "Std. Switch" , "3-Pos. Switch" ,
"Button" and "Proportional" . Any value other than Auto will disable
auto-detection for the specified control. Remember, these settings
are global and are applied to all models. The only model-specific
"Type of control" property applies to stick-switches Sk and Sl . This
feature is useful, for example, if you want to have a standard switch
that behaves like a spring loaded switch equipped with button
memory.
2. Switch ON/OFF Points
Any proportional function can be set as a system switch. This menu
item enables you to assign the travel percentage at which a desired
function can be turned ON or OFF.
“Switch-ON” – The point when the control element positon will
switch a function ON.
“Switch-OFF” – The point when the control element positon will
switch a function OFF.
By default, the system setting for all proportional channels and for all
inputs is set to function the same as a 3-position switch.
a) A function above this point is considered to be “Switch ON”
101