Jetfire E3, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 16

10
IMPORTANT
Before using the space heater, please read
carefully all the instructions for use described
below and follow the indications scrupulously.
The manufacturer cannot be held responsible for
damage to persons and/or property caused by
improper use of the equipment.
This instruction manual is an integral part of the
equipment and must therefore be kept carefully
and passed on with the unit in the event of a
change of ownership.
Description
The mobile electrical space heaters have been designed
to heat industrial and/or civil places such as warehouses,
building yards, shops, homes, and public places, and can
be used in damp and wet environments.
Air is taken from the environment through a fan and
heated by armour-plated resistance and then released
back into the environment to be heated.
Space heaters are made of steel sheets and provided with
a double wall to enhance the machine efficiency and to
limit the external walls temperatures,
They are also predisposed only for use on the floor.
General advice
Installation, setting up and use of the hot air generator
must be affected in accordance with the applicable
regulations and laws relating to the use of such
equipment.
Few general guidelines should be followed:
• the instructions in this manual are carefully followed;
• do not install the heater near showers, bathtubs, or
swimming pools, and in any case so that the controls
and switches are not accessible by the person who is
in contact with water;
• do not place the heater immediately under a fixed wall
socket;
• the heater must be placed on a firm surface to avoid
overturning;
• no flammable materials are stored in the vicinity of the
heater;
• the heater must not be covered;
Warning
do not cover the heater, it may overheat
• make sure heater is always under
surveillance and keep children and animals
away from it;
• at the end of each working period the main
switch is disengaged.
Warning
this unit may not be used by persons with
reduced
physical, sensorial or mental
capacities or with limited experience and
familiarity unless they are under supervision
or instructed on how to use the equipment by
the person responsible for its safety.
Installation instructions
Warning
the installation must only be performed by
professional and skilled personnel.
Before switching on the heater, and therefore,
before plugging it into the electrical power supply,
a check must be made that the power supply
specifications are the same as those stated on the
identification plate.
Warning
• the power line of the generator must be
fitted with an earth lead and a residual
current circuit breaker.
• unit plug must be linked to a socket with a
mains switch.
Heaters, that are not provided with electric plug,
shall be connected to main supply line by means
of a section switch in accordance with national
rules.
Before switching on the heater, and therefore,
before plugging it into the electrical power supply,
a check must be made that the power supply
specifications are the same as those stated on
the identification plate.
Warning
for the 30-kw model, the first time it is turned
on, check that the direction of rotation of the
fan is correct and if necessary, reverse the
sequence of connection of the phases of the
power cable
Operating instructions - mod 3 kw
To start the machine:
•
Press the button (3): the fan starts immediately.
•
Turn the knob (1) on the room thermostat to the
desired temperature: the electric heaters start and
continue running until the set temperature has been
reached
•
Select the electric power output by pressing the
button (4):
•
heating to minimum power
o
Press the switch in position
•
Heating to maximum power
o
press the switch in position