Jet XACTA JTAS-12-DX, Инструкция по эксплуатации и каталог запасных частей

Страница: 9 / 28

9
7.0 Setup and assembly
7.1 Tools required for assembly
Metric wrench set, or 6”-8” adjustable wrench
Metric hex key set
Straight edge
7.2 Shipping contents
Carton contents (see Figure 1)
1 Table saw (not shown)
1
Blade guard – A
1 Anti-kickback pawl assembly – B
1 Lock knob – C
1 Handwheel with swivel handle – D
1 Riving knife – E
1 Miter gauge – F
1 Switch support brace – G
1 Arbor wrench – H
1 Push stick – I
1 Hex key 8mm – J
1 Storage hook, small – K
2 Storage hooks, large – L
1 Motor cover – M
2 Legs with leveling feet – N
1 Cast iron table extension, 10-inch – O
2 Cast iron table extensions, 23-inch – P
1 Operator’s Manual (not shown)
1 Warranty Card (not shown)
2
Hardware bags containing:
3 Hex cap screws, 7/16”x1-1/2” – HP1
3 Lock washers, 7/16” – HP2
3 Flat washers, 7/16” – HP3
8 Hex cap screws, 5/16”x3/4” – HP4
8 Lock washers, 5/16” – HP5
8 Flat washers, 5/16” – HP6
Note: Fence and rail assemblies are shipped in
separate cartons.
Figure 2
Figure 1
(items not to scale)