PROGRAM SETUP INFORMATION
Step # 4
Viewing the password screen
Step # 5
Entering the pass code
Step # 6
Using the keypad to make a selection
After pushing and holding the
( + )
button, the screen will
display the phrase "ENTER PASSCODE TO ENTER SYSTEM
SETUP". This is your indication that the game is now in setup
mode and you can release the
( + )
button.
The system setup is protected by a numeric pass code. A pass
code is used so that operators can ensure settings cannot be
changed without proper permissions and proper access.
Enter the proper pass code and push "ENTER" to gain access
to the system information page.
DEFAULT PASSCODE
0000
Notice: You can change the pass code to any four digit
numeric code. Please remember the pass code.
After inserting the proper pass code, push the
"ENTER"
button on the keypad to enter the system setup. If the pass
code is incorrect, the screen will prompt you to enter the
pass code again. If you have forgotten the pass code - please
contact JET to learn how to gain access.
Jennison Entertainment Technologies
Space Ballz Service Manual
Page 38
