1) As you can see in the photo to the right - the support tab fits
securely into the receiving hole and the bolts on Section # 3 fit right
through the receiving holes on Section # 4.
2) Use the provided nuts, washers, and lock washers to secure each
of the four bolts. Use the provided tool to tighten all nuts.
Connecting Electrical Connectors
After pushing both connectors through the rear hole - plug each one
into the corresponding connectors.
Check Box When This Step is Complete
Check Box When This Step is Complete
Step # 7
Connecting Electrical Connectors
Open the rear access door and look up and to the left. Just above the
access hole - you will see two wire connections that must be plugged
in. Take each wire and push it down through the hole in the rear of
the cabinet.
Check Box When This Step is Complete
INSTALLATION INSTRUCTIONS
Step # 6-J
Securing Section # 4 to Section # 3
Step # 7-A
1
2
Jennison Entertainment Technologies
Space Ballz Service Manual
Page 24
