Jet JWS-35X Series, Инструкция по эксплуатации и каталог запасных частей

Страница: 11 / 49

Figure 3
Adjustments
When changing tools, making
adjustments, or doing clean-up and maint-
enance, always turn the machine off and
unplug the machine from its power source.
Fence Assembly Movement
Referring to Figure 4:
The adjustment controls of the fence assembly
are as follows:
A – Fence Assembly Lock Knob – to secure fence
assembly to table
B – Lock Knob – to secure the outfeed fence
C – Outfeed Ram Adjust – fine forward/backward
adjustment for outfeed fence
D – Lock Knob – loosening permits side to side
adjustment of infeed or outfeed fence
E – Lock Knob – loosening permits vertical
adjustment of guard (F)
G – Lock Knob – loosening permits
backward/forward adjustment of guard (F)
Handwheel
The handwheel controls the spindle height.
Spindle height
Referring to Figure 5:
1. Loosen the lock knob (A).
2. Turn the handwheel (B) clockwise to raise
and counterclockwise to lower the spindle
(C).
3. Tighten the lock knob (A).
Figure 4
Figure 5
11