6
4.0
Specifications
Table 1
Model number
JSG‐233A‐M
Motor and Electricals
Motor type
induction motor
Motor power
0.37 kW (0,5 HP)
Voltage
1~230V, PE, 50Hz
Listed FLA (full load amps)
3.8 A
Motor speed
2850 /min
Starting amps
12 A
Starting capacitor
100
u
F, 125VAC
On/off switch
magnetic switch
Power cable
H05RN‐F, 3x1.0 mm
2
Recommended circuit size
1
10 A
Sound emission (acoustic pressure level LpA, EN ISO 11202)
2
71 dB idling, 84 dB in operation
Sanding disc
Disc diameter
200 mm
Disc speed
1850 /min
Sanding belt
Sanding belt size
100 x 915 mm
Sanding belt speed
8 m/sec
Belt arm inclination
0°‐90°
Sanding table
Table size
225 x 115 mm
Table tilting range
90° ‐ 45°
Dust collection
Dust port outside diameter
38 mm
Recommended minimum extraction volume
80 m
3
/h
Main materials
Machine base
Cast iron
Sanding arm
steel
Sanding disc
aluminium die casting
Sanding table
aluminium die casting
Dimensions
Assembled dimensions, LxWxH
350 x 400 x 500 mm
Shipping dimensions, LxWxH
Weights
Net weight (approx.)
26 kg
Shipping weight (approx.)
1
Subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace conditions
vary, this information is intended to allow the user to make a better estimation of the hazards and risks involved only.
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
