4. When you control the mill and need quickly stop the spindle speed, you can clap the
emergency stop switch (A), as this time the fault yellow light ( E) will bright.
If you need restart the mill you need turn the F/O/R switch (D) to “0” position, then
control as 1-2-3 steps.
5. Fine feeding function: When lock the Lock small handwheel (A), then the control handle
(B) can not useable. Turn the fine feeding handwheel (C) the spindle will micro remove.
Notice:
After using should turn the power switch to position ‘0’ and pull out the plug from
socket.
6
Содержание JMD-2S
Страница 22: ...JMD 2S 1 230V 50Hz 19 ...