Jet JMD-2S, Руководство по эксплуатации

Страница: 7 / 22

Installation
CAUTION!
DO NOT ATTEMPT TO USE THE MACHINE UNTIL INSTALLTION IS CAMPLETED,
AND ALL PRELIMINARY CHECKS HAVE BEEN MADE IN ACCORDANCE WITH THIS
MANUAL.
MOUNTING THE MACHINE
The machine should be mounted on a strong, heavy workbench, of sufficient height so
that you do not need to bend your back to perform normal operations.
Ensure the location is adequately lit and that you will not be working in your own shadow.
We strongly recommend that the machine bolted firmly to strong workbench using the
tapped holes used to secure the feet to the machine. This is to provide added stability and
consequently, additional safety.
To do this, first drill four M12 clearance holes in a worktop, at the dimensions
shown in the diagram opposite, and with appropriate length M10 bolts, or screws,
with flat washers. (not supply, you need prepare these by yourself).
Application
This small mill machine is for milling or drilling, widely used in different places. Fine
exterior, wide range of speed and easy to use.
Designed for industrial usage milling, drilling, tapping, reaming, steps and mill plane with
metal and other material.
30
5
2 1 0
4