Jet JMD-2S, Руководство по эксплуатации

Страница: 5 / 22

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT OPERATE THE TOOL!
Grounding Instructions
This machine has a three-prong plug, the third prong is the ground. Plug this cord
only into a three-prong receptacle. Do not attempt to defeat the protection the ground wire
provides by cutting off the round prong. Cutting off the ground will result in a safety hazard
and void the warranty.
DO NOT MODIFY THE PLUG IN ANY WAY. IF YOU HAVE ANY DOUBT, CALL A
QUALIFIED ELECTRICIAN.
Specification
：
Max. drilling capacity: 20 mm
End mill capacity 16 mm
Face mill capacity 50 mm
Distance between spindle center to column 190 mm
Max. distance spindle to table 340 mm
Spindle taper
MT-3
Spindle speed
100-2000 rpm
±
10%
Table effective size 595x140 mm
T-slot size 12 mm x 3
Longitudinal travel 394 mm
Cross travel 185 mm
Headstock travel 260 mm
Mains 230V

1/N/PE 50Hz
Motor power 750 W
Distance between spindle end and worktable surface 75 – 340 mm
Overall dimension (L*W*H) 725x620x880 mm
Packing size (L*W*H) 8
2
0x7
2
0x
89
0 mm
Weight 1
10
kg (NW) / 1
2
5 kg (GW)
Unpacking & Preparing for Use
Before unpacking you must check the package carefully, to find whether it is damaged
and any may have effect on the machine, please connect with the distributor in advance.
Unpacking carefully, check the species of standard accessories and the quantity to find
whether it is as same as the packing list in the package.
2