Jet HVBS-56V, Руководство по эксплуатации

Страница: 6 / 28

6
4.0 Specifications
Model number
HVBS-56V
Stock number 414548
Motor and Electricals
Motor type DC brushed motor
Horsepower 1/2 HP (0.375 kW)
Motor phase single
Voltage 115 V only
Cycle 60 Hz
Listed FLA (full load amps) 4
Motor speed 1200-3600 RPM
On/off switches Magnetic push-button; toggle shut-off on bed
Power transfer Gear
Power cable SJT 3x18AWG, 300V, length 5-1/2 ft. (168 cm)
Power plug installed 120 V, 15A
Recommended circuit size
1
15 A
Sound emission without load
2
60~65 dB at 1m (40 in.)
Capacities
Horizontal
capacity
Round
90 deg. 5 in. (127 mm)
45 deg. 3 in. (76 mm)
Rectangle
(HxW)
90 deg. 5 x 5-3/4 (127 x 146 mm); and 2 x 6 in. (51 x 152.4 mm)
45 deg. 4-1/2 x 3 in. (114 x 76 mm)
Throat depth 5 in. (127 mm)
Bow and blade
Blade type provided raker type, bi-metal
Blade size 1/2 x 0.025 x 64-1/2 in. (13 x 0.64 x 1638 mm)
Blade speeds variable, 80-230 SFPM (25-72 MPM)
Blade wheel diameter 7-3/8 in. (187 mm)
Bed and vise
Bed height from floor (mounted to stand) 25-1/2 in. (648 mm)
Vise swivel 0 – 45 deg.
Main materials
Bed cast iron, ground surface
Bow cast iron
Stand steel
Side blade guides ball bearings mounted on eccentric shafts
Rear blade guides ball bearings
Band wheels flanged cast iron
Dimensions
Vertical cutting plate 9-5/8 x 9-1/2 in. (244.5 x 241 mm)
Floor space required 16-1/4 x 42-1/2 in. (413 x 1080 mm)
Overall assembled (LxWxH) 37 x 17.72 x 41.34 in. (940 x 450 x 1050 mm)
Shipping dimensions (LxWxH) 38.78 x 13.98 x 17.80 in. (985 x 355 x 452 mm)
Weights
Net weight 115 lbs. (52 kg)
Shipping weight 143.30 lbs. (65 kg)
Table 1
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height SFPM = surface feet per minute RPM = revolutions per minute