3
25. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
26. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
27. Make sure workpiece is securely clamped in
vise. Never use your hand to hold the
workpiece.
28. Never reach around or over a moving saw
blade.
29. Feed work into a blade or cutter only against the
direction of rotation of the blade or cutter.
30. Set blade guides for minimal exposure of blade
before operating.
31. Don’t use in dangerous environment. Don’t use
power tools in damp or wet location, or expose
them to rain. Keep work area well lighted.
32. Use proper extension cord. Make sure your
extension cord is in good condition. When using
an extension cord, be sure to use one heavy
enough to carry the current your product will
draw. An undersized cord will cause a drop in
line voltage resulting in loss of power and
overheating. Table 2 (sect. 6.2) shows correct
size to use depending on cord length and
nameplate ampere rating. If in doubt, use the
next heavier gage. The smaller the gage
number, the heavier the cord.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal,
injury.
SAVE THESE INSTRUCTIONS
1.1
ON/OFF Switch padlock
To avoid accidental starting by young children or
others not qualified to use the tool, the use of a
padlock (not provided) is required.
To lock out an ON/OFF switch:
1. Open the padlock (Figure A).
2. Insert through hole in start button (Figure B).
3. Close
the
padlock.
4. Place the key in a safe place out of the reach of
children.
(A) (B)
WARNING:
This product can expose you to
chemicals including lead which is known to the
State of California to cause cancer and birth
defects or other reproductive harm, and
ethylbenzene which is known to the State of
California to cause cancer. For more information
go to http://www.p65warnings.ca.gov.
WARNING:
Some dust, fumes and gases
created by power sanding, sawing, grinding,
drilling, welding and other construction activities
contain chemicals known to the State of
California to cause cancer and birth defects or
other reproductive harm. Some examples of
these chemicals are:
•
lead from lead based paint
•
crystalline silica from bricks, cement and
other masonry products
•
arsenic and chromium from chemically
treated lumber
Your risk of exposure varies, depending on how
often you do this type of work. To reduce your
exposure to these chemicals, work in a well-
ventilated area and work with approved safety
equipment, such as dust masks that are
specifically designed to filter out microscopic
particles. For more information go to
http://www.p65warnings.ca.gov/ and http://www.
p65warnings.ca.gov/wood.
Содержание HVBS-56V
