Jet Elite ECB-1833DMEVS, Инструкция по эксплуатации и каталог запасных частей

Страница: 18 / 52

18
Horizontal Band Saw
14.9 MAINTENANCE SCHEDULE
If routine maintenance is neglected, the result will be premature wear and poor performance.
DAILY:
• General cleaning of machine; remove accumulated shavings. (Note: Do not use compressed air.)
• Clean coolant drain hole to avoid excess fl uid buildup in the trough.
• Top off the lubricating coolant.
• Check blade for wear.
• Raise saw head to top position and partially slacken the blade to avoid unneccesary yield stress.
• Check functioning of blade guards and E-stop button
WEEKLY:
• Thoroughly clean the machine to remove swarf, especially from the coolant tank.
• Clean fi lter of pump head and suction area.
• Use brush to clean blade guides, especially the guide bearings.
• Clean strainer and hole over the coolant basin.
• Clean blade wheel housings and races.
MONTHLY:
• Check tightness of drive wheel screws.
• Check that blade guide bearings are in perfect running condition.
• Check tightness of screws for motor, pump, and blade guards
EVERY SIX MONTHS:
• Perform circuit continuity checks.
• Drain and refi ll gearbox.