Jet CS-275, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 32

5
29. Make sure the work piece is securely attached
or clamped to the table. Never use your hand
to hold the work piece.
30. Turn off the machine and disconnect from
power before cleaning. Use a cloth or brush to
remove chips or debris — do not use your
hands.
31. Do not stand on the machine. Serious injury
could occur if the machine tips over.
32. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
33. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -
4.0 Introduction
The JET CS-275 and CS-315 Cold Saws are designed to provide a reliable solution to the needs of machine
shops and production environments that work with steel or iron. The saws are manually operated. After
clamping the material in the vise, the operator presses the trigger starting the blade, and brings the operating
lever downward to cut the material. The saws
can perform miter cuts up to 45º to the right or left.
This manual is provided by JET covering the safe operation and maintenance procedures for the JET Cold
Saw. This manual contains instructions on installation, safety precautions, general operating procedures,
maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide
consistent, long-term operation if used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it