Jet AB-1012W, Инструкция по эксплуатации и каталог запасных частей

Страница: 22 / 52

22
15.0 Lubrication Schedule
Disconnect Band Saw from electrical supply when performing maintenance. Try to
minimize direct contact with lubricating fluids, and protect the eyes from coolant splash.
Ball bearings on the Band Saw are pre-lubricated and sealed – they will not require further attention.
Used lubricants should be disposed of properly, according to local regulations.
Machine Element Lubricant Quantity Period
Bench vise slideways Light machine oil as needed Daily (after cleaning)
Shuttle vise slideways Light machine oil as needed Daily (after cleaning)
Coolant tank* Water-soluble cutting fluid High level on gauge Top off Daily
Worm gear Grease as needed Monthly
Drive wheel oil nipple Grease as needed Every 2 weeks
Idle wheel oil nipple Grease as needed Every 2 weeks
Slide of slide seat Light machine oil as needed Every 2 weeks
Shuttle vise short jaw Grease as needed Every 2 weeks (oil after cleaning)
Hydraulic cylinder pivot Light machine oil as needed Every 6 months
Gear box No. 90 Gear Oil Mid level on gauge After first 6 months (yearly after that)
Hydraulic system tank
Mobil® DTE Light ISO32
(or comparable)
High level on gauge
After first 3 months (yearly after that,
or every 3,000 hours of operation)
* Consult coolant manufacturer’s instructions for complete flushing schedule.