Controller Unit Settings | Operation & Maintenance Instructions TOPAX L1/L4/L5 |
9
6.7 Manual relay control
If the controller is set to automatic, change it to manual
operation by pressing the > key.
Instead of “Auto”, “Manual” will appear in the display.
2) Change into the S1 switch mode by pressing the ^ key.
The box to the left of S1 will begin to blink.
3) Switch Relay 1 ON by pressing the > key.
The box to the left of S1 will become dark.
4) By again pressing the > key, the relay is switched OFF
again. The box will become light again.
5) Change to the S2 switch mode by pressing the ^ key.
The box to the left of S2 will begin to blink.
6) Switch the relay ON by pressing the > key.
The box to the left of S2 will become dark.
7) By again pressing the > key, the relay is switched OFF
again. The box will become light again.
8) Exit the S2 switch mode by pressing the ^ key.
When both boxes are light and neither is blinking you
have exited the switch mode.
Manual control of the relay is possibly directly from the measurement value display.
With the
key, switch the controller to manual operation.
Using the
key, change between manual operation <> S1 switch mode <> S2 switch
mode <> manual operation.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Auto
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
0.29 mg/l 25.0°C
S1
S2 Man.
Содержание TOPAX L1
Страница 41: ...Declaration of conformity Operation Maintenance Instructions TOPAX L1 L4 L5 41 Page 2 of 2 ...
Страница 44: ......
