INSTALLATION INSTRUCTIONS
DL-FLEX2-TILE
Instruction sheet subject to
change without prior notice
Rev 59
3/12/2020
Page 4 of 6
WIRING DIAGRAMS
NOTE:
Vertical mounting recommended for LED drivers
NOTE:
Leave at least 1” spacing between LED drivers to allow for airflow to prevent heat buildup
NOTE:
Leave the power connector with enough slack to account for expansion and contraction due to tempearature changes
PLUG AND PLAY
HARDWIRE
DIMMING OPTION
–
TRIAC (Using our DL-PS-XX/24-JB-DIM or DL-PS-XX/24/HW-DIM drivers). Minimum 15W load is required
NOTE: UL Recognized drivers must be installed in UL Listed junction box
