4 DESCRIPTION OF CONTROLS
4-14
EM210F-1
4.3 MONITOR
DISPLAY
4.3.1 Page
1
②
⑯
⑥
①
③
④
⑤
⑧
⑪
⑨
⑦
⑩
⑮
⑫
⑰
⑭
⑬
Fig. 4.11 Page 1
①
Used to adjust the monitor brightness.
②
Displays the image forming mode selected with the FUNCTION (R1-
③
).
③
Displays the magnification, camera length or size of the spectrum selected
with the MAG/CAM L knob (R1-
⑥
).
④
Displays the illumination mode and
a
-selector number selected with the
PROBE CONTROL (L1-
③
).
⑤
Displays the spot size value selected with the SPOT SIZE knob (L1-
③
).
⑥
Displays the memory number of the bright/dark field image.
⑦
Displays the accelerating voltage Value.
⑧
Displays the current density on the fluorescent screen.
⑨
Displays the exposure time. The displayed time can be varied using the
PHOTO EXP TIME knob (R1-
⑩
) when the manual exposure mode is
selected. When the automatic exposure mode is selected, the exposure time
is determined automatically by means of the exposure meter.
⑩
Displays the exposure mode selected with the PHOTO AUTO knob (R1-
⑩
).
⑪
Displays the film dispensing mode.
⑫
Displays the exposure meter sensitivity. The smaller the value, the longer the
exposure time
⑬
Displays the film code (two letters) and film number (four digits). The film
number increases by one every time the photographing is performed. The
film code however remains unchanged.
⑭
Displays the number of the unused films.
⑮
Displays the film text that is printed on the film.
⑯
Used to display the specimen position and tilt angle.
⑰
Pr is used to go back to the previous page and Nx is to display the next page.
