Jensen UV9 Скачать руководство пользователя страница 13

Страница: 13 / 84

UV9

OPERATING INSTRUCTIONS

Power On / Off

Press the

/SRC

button (10) on the unit (or the

button (4)

on the remote control) to turn the unit on. The buttons on the
front of the unit light up and the current mode status appears
in the LCD (7). You can also turn on the unit by pressing the

OPEN

button (1) and opening the TFT screen.

Press and hold

the button to power off the unit.The monitor

is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.

Mute/Line Mute

Press the

MUTE

button (8) on the front panel or the

MUTE

button (3) on the remote to mute the volume from the unit.
Press the

MUTE

button again to restore the volume. “MUTE”

is displayed on the LCD. Adjusting the volume or using any of
the audio setup features cancels the mute function.

If the “MUTE” wire is connected, audio output mutes when a
telephone call is received by the car phone or when verbal
navigation is performed.

Playing Source Selection

When the monitor is closed, press the

SRC

button (10) on the

front panel or remote control (8) to change between available
audio playing sources in the following order: AM/FM, DISC,
USB and AUX IN. The mode is displayed on the LCD screen.

Source Menu

You can also use the touch screen to change the source
through the SOURCE MENU. To access the SOURCE
MENU, touch the top left corner of the screen or press the

SRC

button (10).

Touch the DISC, RADIO, USB, NAVI, AUX or CAMERA
button to select the corresponding source.

External Devices

External peripheral devices, including a game console,
camcorder, navigation unit, iPod, Zune, etc. can be
connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).

Connect the external device to the A/V Media Adapter Cable
and then plug the cable into the

A/V INPUT

connector (13) on

the front of the radio. Select “AUX” or “AUX IN” (when
monitor is closed) mode to access auxiliary devices. You
cannot directly control external devices connected to the

A/V

INPUT

Skin Selection

Touch the SKIN button, located in the bottom right corner of
the SOURCE MENU (see “Source Menu” on page 9), to
choose an alternate background image for the touch screen.

Volume Adjustment

Volume Increase/Decrease

To increase or decrease the volume level, turn the rotary
encoder (11) on the front panel or press the

VOL-/+

buttons

(13, 14) on remote control. When the volume level reaches
“0” or “40”, a beep sounds, indicating that the adjustment limit
has been reached. The LCD or TFT screen displays the
volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting
regardless of the volume setting prior to turning the unit off.
To use this feature, the TFT monitor must be displayed.

To program a specific turn-on volume level, turn the rotary
encoder (11) to adjust the volume to the desired turn-on
volume.

Push and hold

the rotary encoder while the yellow

speaker icon and level indication is displayed on the screen.
The unit will beep to confirm your turn-on volume setting.

Audio Control Menu

The Audio Control feature allows you to easily adjust your
audio system to meet the acoustical characteristics of your
vehicle, which vary depending on the type of vehicle and its
measurements. Proper setting of the Fader and Balance
boosts the effects of the cabin equalizer.

Press the rotary encoder (11) on the front panel to display the
audio menu.

•

Use the touch screen

buttons to adjust the settings

for an audio feature.

•

To adjust an audio feature using the remote control,
perform the following steps:
a.

Press the (

>>|

)/(

) buttons (17, 15) to highlight

the audio feature to be adjusted.