![background image](http://html1.mh-extra.com/html/jensen/multimedia-am-fm-dvd-receiver-vm9511ts/multimedia-am-fm-dvd-receiver-vm9511ts_instruction-manual_3755947024.webp)
22
VM9511TS
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking brake is
applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays “PARKING” with a blue
background. Rear video screens, if applicable, will operate
normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the
OPEN
button (1).
The unit beeps and then opens.
Closing the TFT Screen
Press the
OPEN
button (1) again to close the TFT screen. If
the screen is in the “IN” position, it moves out before closing.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc
play begins.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see
“RATING (Parental Lock) Menu” on page 27).
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the button (21) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (21) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the
SRC
button (15) on the front panel or remote
control (8) until “DVD” appears at the bottom of the screen.
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
A – Return to MAIN MENU
B – DISP key: Displays playing information
C – Select previous chapter
D – Select next chapter
E – Display the following on-screen controls: Menu,
>/||
,
,
|<<
,
>>|
,
<<
,
>>
.
Controlling Playback
Stopping Playback
Touch the stop button ( ) on the screen or press the
/
BAND
button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (
>/||
) on the screen or press the
>/||
button on the remote control (18) to suspend or resume
disc play.
Slow Motion Playback
Press the
<<
button (22) on the remote control or the
V
button
(19) on the joystick to play the current title in slow motion at 1/
2, 1/4, 1/6 or 1/7, the normal speed. Press
>/||
(18) to resume
normal play. Continue pressing the
<<
or
V
button to slow
reverse.
Repeat Playback
Press the
REPT
button (7) on the remote control to alter
repeat mode according to the following:
•
DVD: Repeat Title, Repeat Chapter, Repeat Off
•
VCD (PBC Off): Repeat Single, Repeat Off
•
MP3: Repeat Single, Repeat Folder, Repeat Off
NOTE: For VCD play, the repeat function is not available
if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
•
Press the
REPT A-B
button (6) on the remote control to
set the start point (A) of the repeated section.
•
Press the
REPT A-B
button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat continuously.
•
Press the
REPT A-B
button again to cancel the A-B
section setting and stop repeat play.
Random Playback
With a DVD, VCD, or CD playing, press the
RDM
button (33)
on the remote control to activate random playback and play
all chapters/tracks in random order. “On” appears on the
screen.
Press the
>>|
button (19) on the remote control or the
>
button on the joystick (17) to play the next random track.
Press the
RDM
button again to turn random play off.
NOTE: When a VCD is playing with PBC turned “On”,
activating random playback automatically turns PBC off.
Accessing the DVD Menu
Press the
MENU
button (1) on the remote control to recall the
main DVD menu. Use the directional (arrow) buttons (
<
,
>
,
/\
&
V
) on the joystick (16, 17, 18, 19) to select a title from the
menu.
Press the
TITLE
button (2) on the remote control to select a
different title for playback.
Press the
>/||
button (18) on the remote control or the
ENTER
(joystick) button (20) to confirm your selection and begin
playback.
Moving Through Chapters
Press the
>>|
button (19) on the remote control or the
>
button on the joystick (17) to advance to the next chapter on
the DVD.
Press the
|<<
button (17) on the remote control or the
<
button on the joystick (16) to move to the previous chapter.
Содержание Multimedia AM/FM/DVD Receiver VM9511TS
Страница 1: ...VM9511TS Instruction Manual Manual de Instrucciones Guide d instructions...
Страница 5: ...3 VM9511TS WIRING DIAGRAM...
Страница 40: ......
Страница 41: ......