E15
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use
caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
The unit does not
respond (no power).
AC cord is not plugged
into a wall outlet.
Plug the AC cord into a wall outlet.
Wall outlet is not
functioning.
Plug another device into the same outlet
to confirm the outlet is working.
AM band is too noisy.
The reception at the set
location is poor.
Slightly rotate the unit for the best
reception.
Sound is distorted.
Volume level is set too
high.
Decrease the volume.
Sound source is
distorted.
Try a different audio source such as a
music CD.
CD Player does not
play.
CD mode is not
selected.
Slide the FUNCTION switch to select CD
mode.
CD is not installed or
installed incorrectly.
Press the CD onto spindle, printed side
facing up.
CD skips while playing. Disc is dirty or
scratched.
Wipe with cloth or another disc.
Unit gets warm after
extended play at high
volume.
This is normal.
Turn the unit off a period of time or lower
volume.
