E10
CD PLAYBACK/PAUSE
After you have loaded the CD in the player:
1.) Press the
PLAY/PAUSE button to start playback from Track 1 on the disc.
2.) Press the /- buttons to adjust volume level as desired.
3.) To temporarily stop playback, press the
PLAY/PAUSE button again. The disc
continues to spin, but no sound is heard. Press the
PLAY/PAUSE button once
more to cancel pause and resume playback.
4.) To stop playback before the end of a disc, press the
STOP button.
IMPORTANT!!
If the disc is smudged or scratched it may skip or stop completely. This does not indicate
a problem with the player. If this occurs, try playing another disc. If that disc plays
properly, you may assume that the first disc is damaged and unplayable.
or
SKIP/SEARCH Buttons
To skip forward or backward during playback, press the
or
SKIP/SEARCH
buttons repeatedly until the desired track number appears on the display. Playback will
begin on the desired track.
To search for a particular passage on a track during playback, press and hold the
or
SKIP/SEARCH buttons. The player will search rapidly forward or backward.
Release the buttons when you reach the desired point on the track and normal speed
playback will resume at that point.
PROGRAMMED CD PLAYBACK
The CD player can be programmed to play any sequence of up to 20 tracks.
1.) Press the
STOP button before starting the programming.
2.) After the disc loads, pre
ss the PROGRAM button. The “PROG.” indicator will appear
flashing on the display. The display shows program track “01” and flashing to prompt
you to enter the CD track to be programmed.
3.) Select the desired track number by pressing the
or
SKIP/SEARCH
buttons.
4.) Press PROGRAM button to confirm the track number. Program track advances to
“02” and flashing to prompt you enter another CD track.
5.) Repeat above steps 3-4 until you have stored up to 20 tracks in the program memory,
display will show “FL”.
6.) Press the
PLAY/PAUSE button to begin programmed playback. Playback will
(up to total of 20) have been played.
7.) Press the
STOP button to stop programmed tracks playback. Press the
PLAY/PAUSE button will resume normal playback.
NOTE:
If you press
or
SKIP/SEARCH buttons during programmed playback,
the player will skip forward or backward to the next track that was programmed, and not
to the next track in sequence on the disc that is being played.
PLAY MODE - REPEAT Playback
This system has a repeat function which allows you to continuously repeat one track, or
all tracks.
Select the track to be repeated and begin playback. Press the PLAY MODE button,
“Repeat” indicator
will be flashing on the display and the selected track will be
repeated continuously. Press the PLAY MODE button again (the second time),
“Repeat”
indicator
will light on, the entire track will be repeated continuously.
