E12
CASSETTE TAPE OPERATION
1.) Press the POWER button to turn the system "On".
2.) Press the FUNCTION button to select the TAPE mode and
the display shows “tA”.
3.) The system will start playback automatically after inserting
the cassette tape.
4.) Press the /- buttons to adjust volume level as
desired.
5.) Press the TAPE FAST FORWARD / EJECT button half way
when playing, the tape will be advanced forward rapidly.
6.) Slightly press the TAPE FAST FORWARD / EJECT button again to resume normal
playback. The button will resume to the outermost position.
7.) Press the TAPE FAST FORWARD / EJECT button completely, then the playing will
be stopped and the cassette tape will be ejected.
REMARK:
Make sure the direction is correct when inserting the tape.
To avoid damaging the tape, it is recommended to take the cassette tape out of the
deck after listening.
PRESET EQ
During playing mode, tap the PRESET EQ button to choose the different sound effect
from C (CLASSIC) / r (ROCK) / P (POP) / J (JAZZ) / F (FLAT). You can choose the
desired one.
Note:
To leave the EQ mode, tap the EQ button to choose F (FLAT).
LINE OUT CONNECTION
You can connect this unit to your external Hi-Fi / AMPLIFIER system by connecting the
LINE OUT socket to the auxiliary input socket of your Hi-Fi / AMPLIFIER system with
RCA cables (not included).
Note:
The
Volume control of the main unit will not function when using the LINE OUT.
3.5MM STEREO HEADPHONE JACK
The stereo headphone jack is located on the left front panel. Plug a set of stereo
headphones (not included) into this jack for private listening without disturbing others.
The speakers are automatically disconnected when headphones are connected to the
jack.
IMPORTANT:
When using headphones, always set the volume control to a low level
before you put the headphone on. Then put the headphone on and gradually increase
the volume to a comfortable listening level.
