![background image](http://html1.mh-extra.com/html/jensen/jmc-1250/jmc-1250_user-manual_644398015.webp)
E-14
•
•
•
•
CD PROGRAMMING
Up to 60 tacks can be programmed to be played in any required order from one CD
or all CDs in the CD changer.
1. Set in CD mode and press the STOP BUTTON (#8).
2. Press the MEM/CLK-ADJ BUTTON (#14)
3. Press the
DISC SKIP BUTTON
(#23) to select the desired disc.
4. Press SKIP DOWN
BUTTON (#12) or SKIP UP
BUTTON (#28) to select
the desired track.
5. Press the MEM/CLK-ADJ BUTTON (#14) again to store the track in memory.
6. Repeat steps 2 to 5 to enter additional program.
7. Press the
PLAY/PAUSE
BUTTON
(#22) to start playback in order.
Press the STOP BUTTON (#8) to stop playback and press it twice to clear all
programmed track
TAPE OPERATION
GENERAL OPERATION
•
Press POWER ON/STANDBY BUTTON (#7) to turn on the JMC-1250.
•
Press TAPE BUTTON (#26) to enter Tape Mode. The LCD DISPLAY (#2) will
show TAPE.
STOP / EJECT KEY
Press to stop all deck operations. Press again to open the
cassette door.
FAST FORWARD KEY
Press to start rapid tape winding in either forward or reverse
& REWIND KEY
direction. Press the
stop / eject key when the cassette spools
stop turning.
PLAY KEY
Press to start playing tape.
PAUSE KEY
Press to stop the tape operation temporarily. Press again to
resume.
RECORD KEY
Press together with play key to start tape recording.
(DECK 1 ONLY)
PLAYBACK
Put in a cassette tape.
Press the PLAY button to active playback
Adjust the volume control to the desired level.
Use the PAUSE button when you want to stop playback temporarily.
Press the STOP / EJECT button when finished.
Содержание JMC-1250
Страница 6: ...E 5 LOCATION OF CONTROLS ...