Jensen JMC-1250, Руководство пользователя

Страница: 18 / 23

E-17
7. Press the “MODE” button on remote to confirm, “ ” icon flash and timer
source CD/PHONO/TUNER/TAPE appears on the display.
8. Press the MEM/CLOCK-ADJ button (#14) once, timer source flashing.
9. Press the SKIP UP/ DOWN buttons (#28/12) to set source to be controlled
by timer and then press the MEM/CLOCK-ADJ button (#14) to finish.
10. You can press the “ MODE ” button repeatedly to review the presets time in
order.
NOTE : 1. The timer setting will automatically cancel if no button is pressed in a
period of about 10 seconds.
2. If you set ON/OFF timer for PHONO or TAPE, please make sure
record or pre-recorded tape is installed and tone arm or cassette
PLAY key is set and ready to play.
ACTIVE/DE-ACTIVE THE TIMER FUNCTION
1. To active the timer function, press the SLEEP/TIMER button (#11) on main
unit or “TIMER” button on remote once, the timer indicator is shown on
LCD DISPLAY (#2).
2. To cancel the timer function, press the SLEEP/TIMER button (#11) on main
unit or “TIMER” button on remote until the timer indicator “ ” disappear
C. PRESET EQ FUNCTION
This unit provides 5 differences sound modes to enhance your listening experience.
You can select the desired effect by pressing the PRE-SET EQ BUTTON (#21)
repeatedly to get the effect you want:-
FLAT JAZZ ROCK CLASSIC POP
X-BASS OPERATION
Press the X-BASS Button (#4) to enhance the bass effect of the music being
played. Press the X-BASS Button again to turn the effect off.
USING HEADPHONE
Headphones are not supplied with this Music system. You will require headphones
fitted with a 3.5 mm diameter stereo plug and an impedance of 32 ohms. Plug your
headphones into the HEADPHONE JACK (#19) on the front of the unit for private
listening. After plugging in the headphone, the speakers will be automatically
disconnected.
WARNING
:
ALWAYS LOWER THE VOLUME LEVEL BEFORE PUTTING ON
YOUR HEADPHONES. OTHERWISE YOUR HEARING COULD BE
DAMAGED.