19
Unit turned to CD or radio
mode.
Select other modes for iPod charging.
iPod/iPhone is not
installed properly.
Remove your iPod/iPhone from the dock and
check for obstruction on the connectors in the
dock and on your iPod/iPhone. Then reseat it
in the dock.
iPod/iPhone
does not charge.
iPod/iPhone is locked up/
frozen. iPod/iPhone
battery has problem.
Please make sure your iPod/iPhone is
working properly before docking into the unit.
Please refer to your iPod/iPhone manual for
details on resetting.
Weak FM
reception
FM antenna wire is not
fully extended.
Extend or reposition the wire antenna for best
reception.
CD player will
not play
- Unit not in CD function
mode.
- CD is not loaded
properly.
- If the CD is self-
compiled, the media
used may not be
compatible with the
player.
- Select CD function mode.
- Load CD with label side up.
- Use better quality blank media and retest.
CD skips while
playing
- Disc is dirty or
scratched.
- Wipe CD with clean cloth or use another disc.
Intermittent
sound from CD
player
- Dirty or defective disc
- Dirty pick up lens
- Player is subject to
excessive shock or
vibration
- Clean or replace the defective disc.
- Use a CD lens cleaning disc to clean the
lens.
- Relocate the player away from shock or
vibration.
Volume level is set too
high.
Decrease the volume.
Sound is
distorted.
Sound source is distorted.
If the iPod/iPhone original sound source is of
poor quality, distortion and noise are easily
noticed with high-power speakers. Try a
different audio source such as a music CD.
If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
setting.
