Jensen JiMS-215i, Руководство пользователя

Страница: 14 / 22

13
CD PROGRAMMED PLAY
For both CDs and MP3 CDs, up to 64 tracks can be programmed in your desired order.
The same track can be programmed more than once.
1.
In
Stop
mode press the
ENTER/MEMORY/CLOCK ADJ
Button once. The Program
Number “
P-01
” will briefly appear on the Display. Track No. “
00
” and the Program
Indicator, “
MEMORY
”, will appear and flash on the Display
2.
While the “
00
” and “
MEMORY
” are flashing press or
to select a track you want to program. For example the first
track is selected.
3.
Press the
ENTER/MEMORY/CLOCK ADJ
Button to confirm. The first track is
programmed. The Program Number will advance to “
P-02
” and briefly shown on the
LCD Display. Track No. “
00
” and the Program Indicator “
MEMORY
” will flash on the
Display to prompt for input.
4.
Repeat steps 2 & 3 to program more tracks. Any attempt to program more than 64
tracks will result in first programmed number appears and discontinuance of the
programming.
5.
Press to start program play and press to stop.
6.
Normally all the programmed tracks will be played through once and then stop.
However, you may use the REPEAT function to repeatedly play a certain track
(Repeat 1) or all tracks in the program (Repeat All). You may also tap
to go
directly to other tracks ahead or tap twice to go back to previous track(s)
during program play.
7.
After programmed playback stops, all the programmed tracks are retained in the
memory until the CD Door is opened. To restart programmed play, first press the
ENTER/MEMORY/CLOCK ADJ
Button and then the Button.
8.
To resume to normal playback, press the Button once in the porgrammed play
Stop mode.
9.
To clear the program contents, open the CD Door.
Changing a Track in the Program Memory
In case you want to change the track in your programmed play, proceed in the following:
1. In programmed play Stop Mode, repeatedly press the
ENTER/MEMORY/CLOCK
ADJ
Button until the number you want to replace is displayed .
2. Select a track as described as in procedure 2 to 3 above
3. P ress the
ENTER/MEMORY/CLOCK ADJ
Button to complete. .